PCIe M.2 SSDs

MTE712P

Transcend's M.2 SSD MTE712P is a Power Loss Protection (PLP) SSD. During unexpected power outages, the built-in tantalum capacitor provides power to the controller and DRAM cache, ensuring data integrity and storage reliability. The MTE712P also complies with the TCG (Trusted Computing Group) Opal 2.0 standards. Data is protected using the hardware-based AES 256-bit encryption and LBA (Logical Block Address) sector-specific permissions.


Transcend's MTE712P features the 112-layer 3D NAND flash and a PCI Express (PCIe) Gen4 x4 interface, achieving never-before-seen transfer speeds. Its built-in DRAM cache enables fast random read and write speeds, and improves drive endurance. In addition, the 30µ" gold finger PCB, Corner Bond technology, and anti-sulfur resistors guarantee its reliability in harsh conditions. Transcend's MTE712P is also 100% chamber tested in-house for extended operating temperatures ranging from -40℃ to 85℃.


Technologies

112-Layer 3D NAND Flash

30µ” PCB Gold Finger

Corner Bond

Wide Temperature

Dynamic Thermal Throttling

Thermal Sensor

AES Encryption

TCG Opal

Read Disturbance

Anti-Sulfur Technology

Garbage Collection

Wear Leveling

TRIM

Bad Block Management

Power Loss Protection (PLP)

Early Move

Firmware Features

  • Supports NVM command
  • Dynamic thermal throttling
  • Built-in LDPC ECC (Error Correction Code) functionality
  • Advanced Global Wear-Leveling and Block management for reliability
  • Advanced Garbage Collection
  • Supports S.M.A.R.T. function to conduct health monitoring, analysis, and reporting for storage devices
  • TRIM command for better performance
  • NCQ command for better performance
  • Full drive encryption with Advanced Encryption Standard (AES)
  • Compliant with TCG Opal specifications and IEEE 1667 standards

Hardware Features

  • Compliant with RoHS 2.0 standards
  • Compliant with NVM Express specification 1.4
  • Compliant with PCI Express specification 4.0
  • Space-saving M.2 form factor (80mm) – ideal for mobile computing devices
  • PCIe Gen 4 x4 interface
  • DDR4 DRAM Cache embedded
  • High-quality 3D NAND flash
  • Endurance: 3K P/E cycles (Program/Erase cycles) guaranteed
  • Key components fortified by default with Corner Bond technology
  • 30µ" PCB gold finger
  • Anti-sulfur technology implemented to prevent sulfurization in the environment
  • Power Loss Protection (PLP) to prevent data loss in the event of sudden power outage
  • Promised operational reliability in a wide temperature range (from -40°C to 85°C)
*Supports Microsoft® eDrive standard

Specifications

Appearance
Dimensions80 mm x 22 mm x 3.88 mm (3.15" x 0.87" x 0.15")
Weight9 g (0.32 oz)
M.2 Type
  • 2280-D5-M
Form Factor
  • M.2 2280

Interface
Bus Interface
  • NVMe PCIe Gen4 x4

Storage
Capacity
  • 128 GB
  • 256 GB
  • 512 GB
  • 1 TB
  • 2 TB
Flash Type
  • 112-layer 3D NAND flash

Operating Environment
Operating Voltage
  • 3.3V±5%
Operating Temperature
  • Standard Temp.
    °C (°F) ~ °C (°F)
  • Extended Temp.
    °C (°F) ~ °C (°F)
  • Wide Temp.
    -40°C (-40°F) ~ 85°C (185°F)
Storage Temperature-55°C (-67°F) ~ 85°C (185°F)
Humidity5% ~ 95%
Shock
  • 15 G, 11 ms, 3 axis
Vibration (Operating)20 G (peak-to-peak), 7 Hz ~ 2000 Hz (frequency)

Power
Power Consumption (Operation)4 watt(s)
Power Consumption (IDLE)1.35 watt(s)

Performance
Sequential Read/Write (CrystalDiskMark)Read: Up to 3,800 MB/s
Write: Up to 3,100 MB/s
4K Random Read/Write (IOmeter)Read: Up to 350,000 IOPS
Write: Up to 340,000 IOPS
Mean Time Between Failures (MTBF)3,000,000 hour(s)
Terabytes Written (TBW)Up to 4,320 TBW
Drive Writes Per Day (DWPD)1.97 (3 yrs)
Note
  • Speed may vary due to host hardware, software, usage, and storage capacity.
  • The workload used to rate DWPD may be different from your actual workload, which may vary due to host hardware, software, usage, and storage capacity.
  • Terabytes Written (TBW) expresses the endurance under the highest capacity.

Warranty
Certificate
  • CE
  • UKCA
  • FCC
  • BSMI
Warranty
  • Three-year Limited Warranty
Warranty Policy
  • Please click here for more information about the Transcend Warranty Policy.
  • Warranty does not apply when Scope Pro software wear-out indicator displays 0% within the warranty coverage.
  • Due to the complexity and variety of industrial applications, Transcend cannot guarantee 100% compatibility with all platforms and under all scenarios. For special applications and environments, it is strongly suggested that you contact Transcend beforehand for clarification.
  • Scope Pro software is required by request. Please contact us for more information.

Order Information

128GB
  • TS128GMTE712P
256GB
  • TS256GMTE712P
512GB
  • TS512GMTE712P
1TB
  • TS1TMTE712P
2TB
  • TS2TMTE712P